Author: Tim Olson <tim@...> Time: Sun Jan 4, 2004 12:03 pm PST Link
The subject asks it all. Will I do good by skipping the hand
squeezer and just buying the Pneumatic, or am I going to kick
myself later?
Tim
Author: "Dan Checkoway" <dan@...> Time: Sun Jan 4, 2004 12:07 pm PST Link
Just yesterday I resorted to using the hand squeezer in an area where the
pneumatic was too bulky. I use the hand squeezers all the time.
And you can't always just resort to shooting and bucking...even if the
gun/set will fit, sometimes you don't want to go that way. This example I
mention that happened yesterday was riveting gap plates to the spinner
bulkhead. I'm not about to start hammering a rivet gun on my perfectly
balanced spinner bulkhead and send everything out of whack. 8^)
You could always skip the hand squeezer until you need it, and then
beg/borrow/steal or just live with some lag time after ordering it, waiting
for it to arrive.
)_( Dan
RV-7 N714D
http://www.rvproject.com
----- Original Message -----
From: "Tim Olson" <tim@5...>
To: "RV10" <RV10@yahoogroups.com>
Sent: Saturday, January 03, 2004 10:16 PM
Subject: [RV10] Can you drop the hand squeezer if you get the pneumatic?
> The subject asks it all. Will I do good by skipping the hand
> squeezer and just buying the Pneumatic, or am I going to kick
> myself later?
> Tim
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/RV10/
>
> To unsubscribe from this group, send an email to:
> RV10-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
Author: "rv7pete" <RV10Pete@...> Time: Mon Jan 5, 2004 10:39 am PST Link
I'm finishing up the tailcone and I haven't used a hand squeezer
yet....just the neumatic!
Pete
--- In RV10@yahoogroups.com, Tim Olson <tim@5...> wrote:
> The subject asks it all. Will I do good by skipping the hand
> squeezer and just buying the Pneumatic, or am I going to kick
> myself later?
> Tim
Author: "jaybrinkmeyer" <jaybrinkmeyer@...> Time: Mon Jan 5, 2004 2:43 pm PST Link
I've found good use for both. The hand squeezer for accuracy in
tight spots and the pneumatic for long rows of rivets and/or
dimpling.
Jay
--- In RV10@yahoogroups.com, Tim Olson <tim@5...> wrote:
> The subject asks it all. Will I do good by skipping the hand
> squeezer and just buying the Pneumatic, or am I going to kick
> myself later?
> Tim