Author: "sgp93gsx" <Lsssp@...> Time: Tue Jan 13, 2004 1:00 am PST Link
I have an opportunity to purchase a used squeezer. Here is part of
the ad:
Chicago Pneumatic CP351 Compression Riveter with several different
head configurations. Has a New .187 "C" Yoke and Neck assembly
installed. This is being sold as is but seems to be fine.
Includes about 3k in accessories / attachments as shown.
It has 5 heads total. I am going to order my emp. kit soon. Just
trying to gather a few things in the meantime.
My question is: Is this squeezer compatable/interchangeable with the
units being ordered new?
I have not seen any pictures of the units or yokes that are being
purchased. Only numbers. I just need to know what to buy or whether I
am purchasing the correct items.
If anyone needs pictures of units/yokes to help please let me know.
Thanks in Advance
Scott
Author: Rick Sked <heeder777@...> Time: Tue Jan 13, 2004 10:14 am PST Link
Scott,
That a Chicago Pneumatics C-frame squeezer (thats where the CP comes from) I have a CP 214 which is the standard C-frame squeezer and I use three yokes, a 2.5 longeron, a 3" standard and a 4" no hole. Now that puppy puts out 6000 pounds of rivet loving compression. The 214 is 3000. If you go to www.chicagopneumatic.com you can look at their whole product line. Do a little searcing to make sure your not paying too much. If your getting this setup for around $500 or less go for it but be aware it may have worn rolloers, piston or some other defect that may require a rebuild. I picked mine up new but there are deals to be found. I can tell you I'm very happy with the items from www.rivettools.com where I went.
Just my pennies worth and by the way....you will love this tool, I helped Bob Kaufmann dimple his VS last weekend and it between the two of us we had it done in about an hour and a half. Between his bum leg and my broke hand (that's why I bought the squeezer) that wasn't too bad :)
Rick Sked
I have an opportunity to purchase a used squeezer. Here is part of
the ad:
Chicago Pneumatic CP351 Compression Riveter with several different
head configurations. Has a New .187 "C" Yoke and Neck assembly
installed. This is being sold as is but seems to be fine.
Includes about 3k in accessories / attachments as shown.
It has 5 heads total. I am going to order my emp. kit soon. Just
trying to gather a few things in the meantime.
My question is: Is this squeezer compatable/interchangeable with the
units being ordered new?
I have not seen any pictures of the units or yokes that are being
purchased. Only numbers. I just need to know what to buy or whether I
am purchasing the correct items.
If anyone needs pictures of units/yokes to help please let me know.
Thanks in Advance
Scott
Yahoo! Groups SponsorADVERTISEMENT
---------------------------------
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/RV10/
To unsubscribe from this group, send an email to:
RV10-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
---------------------------------
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
[Non-text portions of this message have been removed]
Author: Dave Smith <dave@...> Time: Tue Jan 13, 2004 10:15 am PST Link
Scott,
I don't have much to contribute here, other than to say that Avery's is
modeled on the 214, which influenced my decision on which used unit to
buy, as I want to be able to buy additional yokes from them (Why them?
Because I know next to nothing about buying parts, etc. for the thing).
I won an ebay auction this weekend for a Chicago C214 for $227 if that
helps on the pricing at all.
Dave
sgp93gsx wrote:
> I have an opportunity to purchase a used squeezer. Here is part of
> the ad:
>
> Chicago Pneumatic CP351 Compression Riveter with several different
> head configurations. Has a New .187 "C" Yoke and Neck assembly
> installed. This is being sold as is but seems to be fine.
>
> Includes about 3k in accessories / attachments as shown.
>
> It has 5 heads total. I am going to order my emp. kit soon. Just
> trying to gather a few things in the meantime.
>
> My question is: Is this squeezer compatable/interchangeable with the
> units being ordered new?
>
> I have not seen any pictures of the units or yokes that are being
> purchased. Only numbers. I just need to know what to buy or whether I
> am purchasing the correct items.
>
> If anyone needs pictures of units/yokes to help please let me know.
>
> Thanks in Advance
> Scott
--
Dave
http://www.rv10project.net
Author: "Brian Denk" <akroguy@...> Time: Tue Jan 13, 2004 11:33 am PST Link
>Between his bum leg and my broke hand (that's why I bought the squeezer)
>that wasn't too bad :)
>
>Rick Sked
You two guys simply MUST stop having rivet gunfights in the shop!
Brian Denk
_________________________________________________________________
Check out the new MSN 9 Dial-up — fast & reliable Internet access with prime
features! http://join.msn.com/?pgmarket=en-us&page=dialup/home&ST=1
Author: Rick Sked <heeder777@...> Time: Tue Jan 13, 2004 11:52 am PST Link
Nah.....we just need to stay in aircraft and out of automobiles. :)
Rick
Brian Denk <akroguy@h...> wrote:
>Between his bum leg and my broke hand (that's why I bought the squeezer)
>that wasn't too bad :)
>
>Rick Sked
You two guys simply MUST stop having rivet gunfights in the shop!
Brian Denk
_________________________________________________________________
Check out the new MSN 9 Dial-up — fast & reliable Internet access with prime
features! http://join.msn.com/?pgmarket=en-us&page=dialup/home&ST=1
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/RV10/
To unsubscribe from this group, send an email to:
RV10-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
---------------------------------
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
[Non-text portions of this message have been removed]