Author: "serosky" <serosky@...> Time: Wed Aug 4, 2004 5:49 pm PDT Link
Anyone wiring a tailight for the -10? How are you planning on
running the wire? It is pretty tight between the V-Stab and the
Rudder. Im not sure if it is best to run a loop up to the top,
drill a hole midway, or what. Anyone talked to Vans abut this? Any
help is appreciated.
Steve 007 Wings and emp both 90% done. Fuse coming Sept 1st!
------------------------ Yahoo! Groups Sponsor --------------------~-->
Yahoo! Domains - Claim yours for only $14.70
http://us.click.yahoo.com/Z1wmxD/DREIAA/yQLSAA/1yWplB/TM
--------------------------------------------------------------------~-
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/RV10/
<*> To unsubscribe from this group, send an email to:
RV10-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Author: n223rv@... Time: Thu Aug 5, 2004 3:08 am PDT Link
On my -4 I just drilled a hole low on the rear bulkhead, then a
corresponding hole in the front of the fiberglass lower fairing. Used some small
flexible conduit to protect the wires and it works great!
-Mike Kraus
N223RV RV-4 Flying
N213RV RV-10 Empennage complete, working on Tailcone
[Non-text portions of this message have been removed]
------------------------ Yahoo! Groups Sponsor --------------------~-->
Yahoo! Domains - Claim yours for only $14.70
http://us.click.yahoo.com/Z1wmxD/DREIAA/yQLSAA/1yWplB/TM
--------------------------------------------------------------------~-
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/RV10/
<*> To unsubscribe from this group, send an email to:
RV10-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/