Author: "Tim Lewis" <Tim_Lewis@...> Time: Tue Dec 7, 2004 12:10 am PST Link
FYI...
------- Forwarded message follows -------
From: "Bruce Reynolds" <brucer@vansaircraft.com>
To: Tim_Lewis@msm.umr.edu
Date sent: Mon, 6 Dec 2004 14:39:22 -0000
Subject: Re: RV-10 QB Wing difficult-to-reach rivets
for W-1021-L/R
Priority: normal
Tim,
You guessed right, use LP4-3 blind rivets on the gap seal.
Bruce Reynolds
brucer@vansaircraft.com
------- Forwarded message follows -------
From: Tim Lewis <Tim_Lewis@msm.umr.edu>
To: Van's Tech Support
Subject: RV-10 QB Wing difficult-to-reach rivets for
W-1021-L/R
Send reply to: Tim_Lewis@msm.umr.edu
Date sent: Sat, 04 Dec 2004 15:20:53 -0500
Van's,
I'm attempting to rivet the W-1021-L/R flap gap seals on my RV-10 QB
wing. It appears I'll have significant difficulty reaching in to buck
(and inspect) the inboard 5 or 6 AN470AD4-4 rivets because the bottom
wing skin is already riveted in place. Is it acceptable to use LP4-3
rivets in this location?
Thanks,
Tim Lewis
--
Tim Lewis -- HEF (Manassas, VA)
RV-6A N47TD -- 700 hrs
RV-10 #40059 under construction
--
Tim Lewis -- HEF (Manassas, VA)
RV-6A N47TD - 600 hrs
RV-10 #40059 under construction
http://www.geocities.com/timrv6a
------------------------ Yahoo! Groups Sponsor --------------------~-->
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/1yWplB/TM
--------------------------------------------------------------------~-
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/RV10/
<*> To unsubscribe from this group, send an email to:
RV10-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/