Author: "Paul Hahn" <eagerlee@...> Time: Wed Dec 15, 2004 7:52 pm PST Link
We also had one of ours break and a close inspection showed very
little welding penetration of the flat plate material. Luckily my
building partner is a qualified welder and he beefed up both pieces
to be bullit proof. Also , the covers, with nut plates attached by
rivets, can be threaded onto the aft cable housings by shifting the
trim motor assembly all the way to one side and gaining a couple
extra inches of play on that cable, then move the assembly over
towards the other side for a little extra room on that cable.
Paul Hahn
#203
------------------------ Yahoo! Groups Sponsor --------------------~-->
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/1yWplB/TM
--------------------------------------------------------------------~-
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/RV10/
<*> To unsubscribe from this group, send an email to:
RV10-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/