Author: "n147cp" <n147cp@...> Time: Wed Nov 13, 2002 2:08 pm PST Link
Does anyone have the template or drawing/dimensions for the footwells
for the backseater in RV4s? and can you send me a copy to
linch5@k....
Thanks,
Mob
RV-4 147CP
Author: "Rob Ray" <smokyray@...> Time: Thu Nov 14, 2002 2:28 pm PST Link
Hi Mob;
Little known fact, the RV8 kit rear seat floorboard and footwells
sold by Van's in the RV8 kit fit right into the RV4 floorboard. You
can order them directly from Vans. OR, you can look through the past
issues of the RV8R newsletters. The drawings are in an old issue
someplace. Call Van's they will tell you which issue or sell you some
ready made footwells.
Smokey
--- In RV-4@y..., "n147cp" <n147cp@y...> wrote:
> Does anyone have the template or drawing/dimensions for the
footwells
> for the backseater in RV4s? and can you send me a copy to
> linch5@k...
> Thanks,
> Mob
> RV-4 147CP
Author: "n147cp" <n147cp@...> Time: Mon Nov 18, 2002 5:50 am PST Link
I called Vans and they said the RV8 footwells will not work in a RV4
unless you make several modifications. The cost for the RV8 parts
is $45. There recommendations was to get the plans located in the
April 1996 RVATOR magazine. Would be cheaper and not require buying
parts that don't fit.
--- In RV-4@y..., "Rob Ray" <smokyray@y...> wrote:
> Hi Mob;
>
> Little known fact, the RV8 kit rear seat floorboard and
footwells
> sold by Van's in the RV8 kit fit right into the RV4 floorboard.
You
> can order them directly from Vans. OR, you can look through the
past
> issues of the RV8R newsletters. The drawings are in an old issue
> someplace. Call Van's they will tell you which issue or sell you
some
> ready made footwells.
>
> Smokey
> --- In RV-4@y..., "n147cp" <n147cp@y...> wrote:
> > Does anyone have the template or drawing/dimensions for the
> footwells
> > for the backseater in RV4s? and can you send me a copy to
> > linch5@k...
> > Thanks,
> > Mob
> > RV-4 147CP
Author: "Rob Ray" <smokyray@...> Time: Tue Nov 19, 2002 8:11 am PST Link
The modifications are minor, but $45 is too high. I built my own
from those plans and it was easy.Took about 3 hours.
We could build up a couple of sets and put them in yours and
Pat's....
Smokey
--- In RV-4@y..., "n147cp" <n147cp@y...> wrote:
> I called Vans and they said the RV8 footwells will not work in a
RV4
> unless you make several modifications. The cost for the RV8 parts
> is $45. There recommendations was to get the plans located in the
> April 1996 RVATOR magazine. Would be cheaper and not require
buying
> parts that don't fit.
>
> --- In RV-4@y..., "Rob Ray" <smokyray@y...> wrote:
> > Hi Mob;
> >
> > Little known fact, the RV8 kit rear seat floorboard and
> footwells
> > sold by Van's in the RV8 kit fit right into the RV4 floorboard.
> You
> > can order them directly from Vans. OR, you can look through the
> past
> > issues of the RV8R newsletters. The drawings are in an old issue
> > someplace. Call Van's they will tell you which issue or sell you
> some
> > ready made footwells.
> >
> > Smokey
> > --- In RV-4@y..., "n147cp" <n147cp@y...> wrote:
> > > Does anyone have the template or drawing/dimensions for the
> > footwells
> > > for the backseater in RV4s? and can you send me a copy to
> > > linch5@k...
> > > Thanks,
> > > Mob
> > > RV-4 147CP