Author: "Dick Isherwood" <risherwood@...> Time: Thu Aug 9, 2001 7:40 pm PDT Link
Hey guys,
I "dry fitted" the trim tab to the elevator tonight, keeping the
trailing edges and inboard edges of both lined up. When I measured the
distance from the trim tab spar to the rear spar of the elevator I get
1 3/8". Drawing 5PP trim tab section calls for 1 1/8", I also have a
1/4" gap where the hinge will be.
Anybody run into this one?
Dick
RV7 N797RV (reserved)