Author: "Michael Brittain Crowell" <britt@...> Time: Fri Oct 11, 2002 4:55 pm PDT Link
Well this sucks, I need to make dipmles for the #10 screws in the
elevator and rudder counter weights. And I didnt get one in my avery
kit. Its only 6 screws so I'll probaly just borrow a set from the RV
factory out at the airport. Do you Wing and Fuse guys have many
dimpeled #10 screws? If so I'll probaly just buy a set. But if its
only 10-15 in the whole plane I'll just bugem' to borrow.
Britt
N877BC
Author: "Steve J Hurlbut" <sjhdcl@...> Time: Fri Oct 11, 2002 8:46 pm PDT Link
Just countersink a piece of wood, place it under the hole where the screw
will go
and use the actual screw to make the dimple. You can use a plastic hammer of
clamp
to press the screw in place.
Steve
RV7A
fuse
----- Original Message -----
From: "Michael Brittain Crowell" <britt@f...>
To: <RV7and7A@yahoogroups.com>
Sent: Friday, October 11, 2002 6:54 PM
Subject: [RV7Yahoo] #10 dimple die
> Well this sucks, I need to make dipmles for the #10 screws in the
> elevator and rudder counter weights. And I didnt get one in my avery
> kit. Its only 6 screws so I'll probaly just borrow a set from the RV
> factory out at the airport. Do you Wing and Fuse guys have many
> dimpeled #10 screws? If so I'll probaly just buy a set. But if its
> only 10-15 in the whole plane I'll just bugem' to borrow.
> Britt
> N877BC
> Van's Air Force - World Wide Wing
> www.vansaircraft.net
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Author: "Ross Hauck" <ross@...> Time: Wed Oct 16, 2002 10:16 pm PDT Link
Get the dies. I've used mine lots of places, and they'll work much
better than trying to improvise a solution.
Ross/7A finish
----- Original Message -----
From: "Michael Brittain Crowell" <britt@f...>
To: <RV7and7A@yahoogroups.com>
Sent: Friday, October 11, 2002 6:54 PM
Subject: [RV7Yahoo] #10 dimple die
> Well this sucks, I need to make dipmles for the #10 screws in the
> elevator and rudder counter weights. And I didnt get one in my avery
> kit. Its only 6 screws so I'll probaly just borrow a set from the RV
> factory out at the airport. Do you Wing and Fuse guys have many
> dimpeled #10 screws? If so I'll probaly just buy a set. But if its
> only 10-15 in the whole plane I'll just bugem' to borrow.
> Britt
> N877BC
[Non-text portions of this message have been removed]