Author: "Ron Walker" <ron@...> Time: Fri Jun 27, 2003 9:26 am PDT Link
I've started my flaps (yeah) ... I've stumbled a bit looking for a part to
complete the initial "fit assembly". The plans
(http://home.earthlink.net/~n706lg/MVC-145S.JPG) call for a rod end bearing
CM-4MS with an internal lock washer AN936A416 that attaches the flap
actuator arm to the flap reinforcing plate. I've checked my inventory list
and these parts are not listed. Can't see anything about this in the
archives. Have the parts been replaced and my plans are just out of date ?
I suspect they may be part of the fuselage kit perhaps ?
Though I'd check here before tieing up a phone line in to Van's ;o)
Ron
RV7a Wing
40XS Breakaway Airpark
Author: "Phil Birkelbach" <phil@...> Time: Fri Jun 27, 2003 1:03 pm PDT Link
It seems like that part comes with the fuse kit.
Godspeed,
Phil Birkelbach - Houston Texas
RV-7 N727WB (Reserved) - Canopy
http://www.myrv7.com
----- Original Message -----
From: "Ron Walker" <ron@w...>
To: <RV7and7A@yahoogroups.com>
Sent: Friday, June 27, 2003 9:22 AM
Subject: [RV7Yahoo] Missing Part ?
> I've started my flaps (yeah) ... I've stumbled a bit looking for a part to
> complete the initial "fit assembly". The plans
> (http://home.earthlink.net/~n706lg/MVC-145S.JPG) call for a rod end
bearing
> CM-4MS with an internal lock washer AN936A416 that attaches the flap
> actuator arm to the flap reinforcing plate. I've checked my inventory list
> and these parts are not listed. Can't see anything about this in the
> archives. Have the parts been replaced and my plans are just out of date ?
>
> I suspect they may be part of the fuselage kit perhaps ?
>
> Though I'd check here before tieing up a phone line in to Van's ;o)
>
> Ron
>
> RV7a Wing
> 40XS Breakaway Airpark
> Van's Air Force - World Wide Wing
> www.vansaircraft.net
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Author: Terry Dilley <tdilley@...> Time: Fri Jun 27, 2003 1:04 pm PDT Link
Hi Ron, yep, they are included in the fuselage kit.
----- Original Message -----
From: Ron Walker
To: RV7and7A@yahoogroups.com
Sent: Friday, June 27, 2003 6:22 AM
Subject: [RV7Yahoo] Missing Part ?
I've started my flaps (yeah) ... I've stumbled a bit looking for a part to
complete the initial "fit assembly". The plans
(http://home.earthlink.net/~n706lg/MVC-145S.JPG) call for a rod end bearing
CM-4MS with an internal lock washer AN936A416 that attaches the flap
actuator arm to the flap reinforcing plate. I've checked my inventory list
and these parts are not listed. Can't see anything about this in the
archives. Have the parts been replaced and my plans are just out of date ?
I suspect they may be part of the fuselage kit perhaps ?
Though I'd check here before tieing up a phone line in to Van's ;o)
Ron
RV7a Wing
40XS Breakaway Airpark
Yahoo! Groups Sponsor
Van's Air Force - World Wide Wing
www.vansaircraft.net
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Author: "Cary Rhodes" <rhodeseng@...> Time: Fri Jun 27, 2003 1:04 pm PDT Link
The missing rod end bearings are part of the fuse as you suspected.
All you really need at this point is the -4 nut plate.
Pick one up at the local mechanic or ACS.
Cary rhodes
-- In RV7and7A@yahoogroups.com, "Ron Walker" <ron@w...> wrote:
> I've started my flaps (yeah) ... I've stumbled a bit looking for a
part to
> complete the initial "fit assembly". The plans
> (http://home.earthlink.net/~n706lg/MVC-145S.JPG) call for a rod end
bearing
> CM-4MS with an internal lock washer AN936A416 that attaches the flap
> actuator arm to the flap reinforcing plate. I've checked my
inventory list
> and these parts are not listed. Can't see anything about this in the
> archives. Have the parts been replaced and my plans are just out of
date ?
>
> I suspect they may be part of the fuselage kit perhaps ?
>
> Though I'd check here before tieing up a phone line in to Van's ;o)
>
> Ron
>
> RV7a Wing
> 40XS Breakaway Airpark
Author: "peter decraene" <peterdecraene@...> Time: Fri Jun 27, 2003 1:04 pm PDT Link
Ron,
That rod end bearing will be with your fuselage kit.
Pete DeCraene
N526PD Finish kit
----- Original Message -----
From: Ron Walker
To: RV7and7A@yahoogroups.com
Sent: Friday, June 27, 2003 9:22 AM
Subject: [RV7Yahoo] Missing Part ?
I've started my flaps (yeah) ... I've stumbled a bit looking for a part to
complete the initial "fit assembly". The plans
(http://home.earthlink.net/~n706lg/MVC-145S.JPG) call for a rod end bearing
CM-4MS with an internal lock washer AN936A416 that attaches the flap
actuator arm to the flap reinforcing plate. I've checked my inventory list
and these parts are not listed. Can't see anything about this in the
archives. Have the parts been replaced and my plans are just out of date ?
I suspect they may be part of the fuselage kit perhaps ?
Though I'd check here before tieing up a phone line in to Van's ;o)
Ron
RV7a Wing
40XS Breakaway Airpark
Yahoo! Groups Sponsor
Van's Air Force - World Wide Wing
www.vansaircraft.net
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Author: "Merems" <merems@...> Time: Sat Jun 28, 2003 8:23 am PDT Link
Ron,
My RV-7 kit didn't have these items either. I believe they are in the fuselage kit with the rest of the flap actuation components.
Paul
----- Original Message -----
From: Ron Walker
To: RV7and7A@yahoogroups.com
Sent: Friday, June 27, 2003 7:22 AM
Subject: [RV7Yahoo] Missing Part ?
I've started my flaps (yeah) ... I've stumbled a bit looking for a part to
complete the initial "fit assembly". The plans
(http://home.earthlink.net/~n706lg/MVC-145S.JPG) call for a rod end bearing
CM-4MS with an internal lock washer AN936A416 that attaches the flap
actuator arm to the flap reinforcing plate. I've checked my inventory list
and these parts are not listed. Can't see anything about this in the
archives. Have the parts been replaced and my plans are just out of date ?
I suspect they may be part of the fuselage kit perhaps ?
Though I'd check here before tieing up a phone line in to Van's ;o)
Ron
RV7a Wing
40XS Breakaway Airpark
Yahoo! Groups Sponsor
Van's Air Force - World Wide Wing
www.vansaircraft.net
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]