Author: "rmallicoat2000" <rmallicoat2000@...> Time: Thu Feb 5, 2004 6:26 pm PST Link
Thanks to all who answered my post on the QB Fuse starting point. I
will get the manual and the plans as you all suggested, and take it
step by step. I guess I got a little spoiled with the little check
boxes on the emp.:)
Ralph Mallicoat
RV-7 QB
Author: "Larry Driver" <ldriver@...> Time: Thu Feb 5, 2004 7:21 pm PST Link
Ralph,
I was at that point a couple months ago and just now coming to the
end of the fuselage "novel." I pretty much followed the manual but
admit to scanning a little quicker when it was obvious something had
been completed. However, I think there may be a path worn in the
hangar floor between where I have the plans/manual and the
fuselage.<g>
Larry Driver
--- In RV7and7A@yahoogroups.com, "rmallicoat2000"
<rmallicoat2000@y...> wrote:
> Thanks to all who answered my post on the QB Fuse starting point.
I
> will get the manual and the plans as you all suggested, and take
it
> step by step. I guess I got a little spoiled with the little
check
> boxes on the emp.:)
>
> Ralph Mallicoat
> RV-7 QB
Author: "Richard & Roberta Hegy" <rhegy@...> Time: Fri Feb 6, 2004 2:41 pm PST Link
We all did!!!
Roberta
----- Original Message -----
From: rmallicoat2000
To: RV7and7A@yahoogroups.com
Sent: Thursday, February 05, 2004 8:24 PM
Subject: [RV7Yahoo] Quick Build Fuse Starting Point
Thanks to all who answered my post on the QB Fuse starting point. I
will get the manual and the plans as you all suggested, and take it
step by step. I guess I got a little spoiled with the little check
boxes on the emp.:)
Ralph Mallicoat
RV-7 QB
Van's Air Force - World Wide Wing
www.vansaircraft.net
------------------------------------------------------------------------------
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/RV7and7A/
b.. To unsubscribe from this group, send an email to:
RV7and7A-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Author: Bobby Hester <bhester@...> Time: Fri Feb 6, 2004 6:10 pm PST Link
rmallicoat2000 wrote:
>Thanks to all who answered my post on the QB Fuse starting point. I
>will get the manual and the plans as you all suggested, and take it
>step by step. I guess I got a little spoiled with the little check
>boxes on the emp.:)
>
>Ralph Mallicoat
>RV-7 QB
I thought it was going to be a big deal and take alot of time to do
this, but found that it moved along very quickly and was really easy.
You can get an idea of the order of things you''ll have to do by
following my web site. Remember I'm building an RV-7A slider so some
things may be different if your building a differant config.
--
Surfing the Web from Hopkinsville, KY
Visit my web site at: http://www.geocities.com/hester-hoptown/RVSite/
RV7A Slowbuild wings-QB Fuse :-)