RV-9 and RV-9A topics from Mar 2003:

Home -> RV-9 and RV-9A topics from Mar 2003:

Sunday, March 2, 2003

What's a Good Way to Dimple the Elevators?
New Co-Pilot
Trim tab twist
Info on flight instruments
Electric Prop

Monday, March 3, 2003

Indiana builders
Top skin riveting
Anti Collision Lighting Question
Fuselage Shipped!!!
Performance Numbers
RV9A Vne

Tuesday, March 4, 2003

pitot line
Darn, it was going so well...
AFS Products
AFS Primer/Boeshield Compatability
Rudder Bottom Fiberglass

Wednesday, March 5, 2003

Idea's for Instrument Panel paint
UPS delivers Dream-In-A-Box

Thursday, March 6, 2003

(blank subject)
Honda Aircraft Engine
Van's Fuel Gauge Wiring
Inboard wing ribs

Friday, March 7, 2003

Saturday, March 8, 2003

Iowa RV-9A BUILDERS
Gear leg damping
Finishing metal edges
Minimum temperature to buck rivets question
Firewall penetration points

Sunday, March 9, 2003

HS attach angle question
My first major goof...
Looking in Leesburg, Virginia.
Sun N Fun

Monday, March 10, 2003

Inboard nose rib skin holes do not line up with main rib skin holes

Tuesday, March 11, 2003

HS main rib to front spar hole misalignemnt
rudder trailing edge.
rudder trailing edge. In-reply-to: <E180EA4103BD3B4F905E935723E0A8680CF99E@x...>
major gap between HS rear spar and inboard main rib
Freight Follies

Wednesday, March 12, 2003

Cutting the rudder stiffeners
Wheel Pants

Thursday, March 13, 2003

Test
Videos of Construction
Manual vs. electric elevator trim...
Empty weight of RV-9A

Friday, March 14, 2003

Jacks
On the fence
Subaru performance
oldtimers
DEVASTATED RV9A BUILDER
Pneumatic rivet squeezer question
Devastated Builder
Rudder pedal postioning.

Saturday, March 15, 2003

Delta Hawk 160 hp update

Sunday, March 16, 2003

Countersunk aft side of HS rear spar doubler...
battery box kit installation
Whelan Power Supply Location
Engines

Monday, March 17, 2003

Andy, what's the fix for the heavy wing?
"From the Ground Up" video copies

Tuesday, March 18, 2003

Wing shipment
Finishing kit arrives

Wednesday, March 19, 2003

Repairing chips in Gelcoat - Any suggestions?
Wings arrive - Over the hump?
Sun-n-fun

Thursday, March 20, 2003

Dimpling holes in rudder ribs
Start

Friday, March 21, 2003

Continental IO240B1B for Rv's
Letting gyros sit

Saturday, March 22, 2003

Finding a used engine
HS inboard rib to spar rivets
Lycoming O-320 A1B
The engine arrived yesterday

Sunday, March 23, 2003

Alternative to the fuel tank sealant for the elevators
Ron Drake in Michigan
Extra hole in F-779 tail bottom skin

Monday, March 24, 2003

J-Channels/F-706 Connect Points
fixing dents
Fixed Pitch vs. Contant Speed

Thursday, March 27, 2003

Vertical Stab installation
Intercom and VHF Option.

Friday, March 28, 2003

Using a 0 235
Fillter
(blank subject)

Saturday, March 29, 2003

Phatam Parts
Fuel Burn
(unknown)
Wultrad/Falcon vacuum gauges

Sunday, March 30, 2003

rv 9A VS flange dimples
From the Ground up

Monday, March 31, 2003

Megs Field Bulldozed!
Closed end pop rivets
RV-List: Meigs field closed.
rudder stiffners holes matching skins?
any builders in the fresno, ca area?

Search Messages: