Author: "malcolm_wheatley" <malcolm_wheatley@...> Time: Sun Mar 24, 2002 5:00 am PST Link
A while back -- Jan/ Feb/ time -- a 'regular' in either this or the
Matronics forum recommended a specific bucking bar from, I think,
Avery. It was supposed to be ideal for the HS nose ribs. I'm about
to order some bucking bars and would like to pick this one up as
well. I've hunted through the archives (my own and elsewhere) but
can't find the message. Can anyone throw any light on it?
Malcolm Wheatley
HS -- about to dimple skins
Author: "Brian & Amanda Woodruff" <woodruff@...> Time: Sun Mar 24, 2002 11:53 am PST Link
The one you want is part #685 from Avery. It looks kind of like a railroad
spike. Those first few rivets were probably the most frustrating part of
the whole project so far! I tried to buck them with one of the bars I got
in the standard kit from Avery and ended up dinging the skin. The angled
face on the small bucking bar works really well.
Brian
-----Original Message-----
From: malcolm_wheatley [mailto:malcolm_wheatley@c...]
Sent: Sunday, March 24, 2002 5:00 AM
To: RV-9A@yahoogroups.com
Subject: [RV-9A] HS nose ribs bucking bar recommendation
A while back -- Jan/ Feb/ time -- a 'regular' in either this or the
Matronics forum recommended a specific bucking bar from, I think,
Avery. It was supposed to be ideal for the HS nose ribs. I'm about
to order some bucking bars and would like to pick this one up as
well. I've hunted through the archives (my own and elsewhere) but
can't find the message. Can anyone throw any light on it?
Malcolm Wheatley
HS -- about to dimple skins
Yahoo! Groups Sponsor
ADVERTISEMENT
To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@egroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Author: "Greg Tanner" <gtanner@...> Time: Sun Mar 24, 2002 12:00 pm PST Link
I tried to make do with what I had and that was a mistake. That portion of
my project to date is by far the least satisfying result. It'll work but a
modest amount of filler will be required to hide the recess. (too much
air--not enough backup)
Greg
-----Original Message-----
From: Brian & Amanda Woodruff [mailto:woodruff@d...]
Sent: Sunday, March 24, 2002 11:56 AM
To: RV-9A@yahoogroups.com
Subject: RE: [RV-9A] HS nose ribs bucking bar recommendation
The one you want is part #685 from Avery. It looks kind of like a railroad
spike. Those first few rivets were probably the most frustrating part of
the whole project so far! I tried to buck them with one of the bars I got
in the standard kit from Avery and ended up dinging the skin. The angled
face on the small bucking bar works really well.
Brian
-----Original Message-----
From: malcolm_wheatley [mailto:malcolm_wheatley@c...]
Sent: Sunday, March 24, 2002 5:00 AM
To: RV-9A@yahoogroups.com
Subject: [RV-9A] HS nose ribs bucking bar recommendation
A while back -- Jan/ Feb/ time -- a 'regular' in either this or the
Matronics forum recommended a specific bucking bar from, I think,
Avery. It was supposed to be ideal for the HS nose ribs. I'm about
to order some bucking bars and would like to pick this one up as
well. I've hunted through the archives (my own and elsewhere) but
can't find the message. Can anyone throw any light on it?
Malcolm Wheatley
HS -- about to dimple skins
Yahoo! Groups Sponsor
ADVERTISEMENT
To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@egroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@egroups.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Author: "Haywire" <haywire@...> Time: Sun Mar 24, 2002 12:22 pm PST Link
> The one you want is part #685 from Avery. It looks kind of like
> a railroad
> spike.
I made mine from an actual railroad spike. It was easy to grind to shape,
worked well & best of all was free. The hard part was pulling it out of the
tracks between trains........ ;-)
S. Todd Bartrim
13B rotary powered
RV-9endurance (finish kit)
C-FSTB (reserved)
http://www3.telus.net/haywire/RV-9/C-FSTB.htm
Author: "Barry Wainwright" <barry@...> Time: Mon Mar 25, 2002 8:20 am PST Link
Could you tell me what Tool Kit you got for Avery tools?
Thanks
-----Original Message-----
From: Brian & Amanda Woodruff [mailto:woodruff@d...]
Sent: Sunday, March 24, 2002 1:56 PM
To: RV-9A@yahoogroups.com
Subject: RE: [RV-9A] HS nose ribs bucking bar recommendation
The one you want is part #685 from Avery. It looks kind of like a
railroad
spike. Those first few rivets were probably the most frustrating part
of
the whole project so far! I tried to buck them with one of the bars I
got
in the standard kit from Avery and ended up dinging the skin. The
angled
face on the small bucking bar works really well.
Brian
-----Original Message-----
From: malcolm_wheatley [mailto:malcolm_wheatley@c...]
Sent: Sunday, March 24, 2002 5:00 AM
To: RV-9A@yahoogroups.com
Subject: [RV-9A] HS nose ribs bucking bar recommendation
A while back -- Jan/ Feb/ time -- a 'regular' in either this or the
Matronics forum recommended a specific bucking bar from, I think,
Avery. It was supposed to be ideal for the HS nose ribs. I'm about
to order some bucking bars and would like to pick this one up as
well. I've hunted through the archives (my own and elsewhere) but
can't find the message. Can anyone throw any light on it?
Malcolm Wheatley
HS -- about to dimple skins
Yahoo! Groups Sponsor
ADVERTISEMENT
To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@egroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Yahoo! Groups Sponsor
ADVERTISEMENT
<http://rd.yahoo.com/M=215002.1818248.3328688.1261774/D=egroupweb/S=1705
065618:HM/A=847665/R=0/*http://ads.x10.com/?bHlhaG9vbW9uc3RlcjcuZGF0=101
6999633%3eM=215002.1818248.3328688.1261774/D=egroupweb/S=1705065618:HM/A
=847665/R=1>
<http://us.adserver.yahoo.com/l?M=215002.1818248.3328688.1261774/D=egrou
pmail/S=1705065618:HM/A=847665/rand=265337744>
To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@egroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
Author: "malcolm_wheatley" <malcolm_wheatley@...> Time: Tue Mar 26, 2002 4:10 am PST Link
Thanks, everyone, for the replies. Looks like #685 was the one...
we're some way from the railroad, here, so I'll pass up on the
opportunity to craft my own from a tie!
Malcolm Wheatley
--- In RV-9A@y..., "malcolm_wheatley" <malcolm_wheatley@c...> wrote:
> A while back -- Jan/ Feb/ time -- a 'regular' in either this or the
> Matronics forum recommended a specific bucking bar from, I think,
> Avery. It was supposed to be ideal for the HS nose ribs. I'm
about
> to order some bucking bars and would like to pick this one up as
> well. I've hunted through the archives (my own and elsewhere) but
> can't find the message. Can anyone throw any light on it?
> Malcolm Wheatley
>
> HS -- about to dimple skins