Author: "jerrynvanatta" <jnv@...> Time: Thu Oct 31, 2002 1:35 pm PST Link
Can anyone tell me what part you used to connect the pitot PVC to the
wing Pitot 1/4 aluminum at the wing?
Thanks,
Jerry
Author: "Larry Perryman" <larry-perryman@...> Time: Thu Oct 31, 2002 2:47 pm PST Link
Jerry,
You have two choices.
1. Flare both tubes with an AN union.
2. Go to Home Depot and get a 1/4 inch tube union with compression
fittings. You will need the small brass tube that goes inside the
plastic to support the ferrel
Regards
Larry Perryman
Author: "Steve Sampson" <SSampson.SLN21@...> Time: Fri Nov 1, 2002 11:55 am PST Link
Jerry - 6th issue Rvator p8 has one idea for that from VANS. I suggest yiou
look rather than I describe.
One related point. I could see no reason to make an extra joint in the ASI
system so have run the plastic all the way out along the wing as well. I
have a coil in the wing root and will take it through to the ASI at final
rigging.
Steve
#90360
N Yorks UK
Lost in the middle! Fuel vents this weekend.
-----Original Message-----
From: jerrynvanatta [mailto:jnv@c...]
Sent: 31 October 2002 21:35
To: RV-9A@yahoogroups.com
Subject: [RV-9A] Pitot
Can anyone tell me what part you used to connect the pitot PVC to the
wing Pitot 1/4 aluminum at the wing?
Thanks,
Jerry
To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@egroups.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Author: Jerry Vanatta <jnv@...> Time: Fri Nov 1, 2002 12:07 pm PST Link
Do you mean the 6th issue of 2002? I only have issue 5.
Thanks
-----Original Message-----
From: Steve Sampson [mailto:SSampson.SLN21@l...]
Sent: Friday, November 01, 2002 12:32 PM
To: RV-9A@yahoogroups.com
Subject: RE: [RV-9A] Pitot
Jerry - 6th issue Rvator p8 has one idea for that from VANS. I suggest
yiou
look rather than I describe.
One related point. I could see no reason to make an extra joint in the ASI
system so have run the plastic all the way out along the wing as well. I
have a coil in the wing root and will take it through to the ASI at final
rigging.
Steve
#90360
N Yorks UK
Lost in the middle! Fuel vents this weekend.
-----Original Message-----
From: jerrynvanatta [mailto:jnv@c...]
Sent: 31 October 2002 21:35
To: RV-9A@yahoogroups.com
Subject: [RV-9A] Pitot
Can anyone tell me what part you used to connect the pitot PVC to the
wing Pitot 1/4 aluminum at the wing?
Thanks,
Jerry
To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@egroups.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@egroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Author: "Steve Sampson" <SSampson.SLN21@...> Time: Fri Nov 1, 2002 2:25 pm PST Link
2001!
-----Original Message-----
From: Jerry Vanatta [mailto:jnv@c...]
Sent: 01 November 2002 20:09
To: RV-9A@yahoogroups.com
Subject: RE: [RV-9A] Pitot
Do you mean the 6th issue of 2002? I only have issue 5.
Thanks
-----Original Message-----
From: Steve Sampson [mailto:SSampson.SLN21@l...]
Sent: Friday, November 01, 2002 12:32 PM
To: RV-9A@yahoogroups.com
Subject: RE: [RV-9A] Pitot
Jerry - 6th issue Rvator p8 has one idea for that from VANS. I suggest
yiou
look rather than I describe.
One related point. I could see no reason to make an extra joint in the ASI
system so have run the plastic all the way out along the wing as well. I
have a coil in the wing root and will take it through to the ASI at final
rigging.
Steve
#90360
N Yorks UK
Lost in the middle! Fuel vents this weekend.
-----Original Message-----
From: jerrynvanatta [mailto:jnv@c...]
Sent: 31 October 2002 21:35
To: RV-9A@yahoogroups.com
Subject: [RV-9A] Pitot
Can anyone tell me what part you used to connect the pitot PVC to the
wing Pitot 1/4 aluminum at the wing?
Thanks,
Jerry
To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@egroups.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@egroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@egroups.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/