Author: "Richard Garforth" <Richard@...> Time: Wed Aug 13, 2003 7:07 am PDT Link
Booger,
You will find that as you match drill the skins the plastic traps aly swarf and this can get imprinted on the skin if you don't clear the plastic before dimpling.
Richard
G-RVIX
[Non-text portions of this message have been removed]
Author: "Phil Perry" <philstar@...> Time: Thu Aug 14, 2003 1:01 pm PDT Link
Booger,
I used a small tip soldering pen to melt a small circle around the holes,
and used a dental pic to carefully pull the little vinyl circle away from
the skin. You can also do strips 1/2" or so wide melting about six or eight
inches at a time kinda brushing the soldering pen across the vinyl. It
doesn't take long to get it down.
Phil Perry
----- Original Message -----
From: "Richard Garforth" <Richard@h...>
To: <RV-9A@yahoogroups.com>
Sent: Wednesday, August 13, 2003 9:07 AM
Subject: [RV-9A] plastic/dimples
> Booger,
>
> You will find that as you match drill the skins the plastic traps aly
swarf and this can get imprinted on the skin if you don't clear the plastic
before dimpling.
>
> Richard
> G-RVIX
>
> [Non-text portions of this message have been removed]
> To unsubscribe from this group, send an email to:
> RV-9A-unsubscribe@egroups.com
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Author: "Booger" <booger99@...> Time: Thu Aug 14, 2003 8:50 pm PDT Link
thanks
I'll the plastic around the hole before dimppling and try that
trick with the soldering iron
Booger
----- Original Message -----
From: Phil Perry
To: RV-9A@yahoogroups.com
Sent: Thursday, August 14, 2003 3:00 PM
Subject: Re: [RV-9A] plastic/dimples
Booger,
I used a small tip soldering pen to melt a small circle around the holes,
and used a dental pic to carefully pull the little vinyl circle away from
the skin. You can also do strips 1/2" or so wide melting about six or eight
inches at a time kinda brushing the soldering pen across the vinyl. It
doesn't take long to get it down.
Phil Perry
----- Original Message -----
From: "Richard Garforth" <Richard@h...>
To: <RV-9A@yahoogroups.com>
Sent: Wednesday, August 13, 2003 9:07 AM
Subject: [RV-9A] plastic/dimples
> Booger,
>
> You will find that as you match drill the skins the plastic traps aly
swarf and this can get imprinted on the skin if you don't clear the plastic
before dimpling.
>
> Richard
> G-RVIX
>
> [Non-text portions of this message have been removed]
> To unsubscribe from this group, send an email to:
> RV-9A-unsubscribe@egroups.com
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Yahoo! Groups Sponsor
ADVERTISEMENT
To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@egroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]