Author: "MICK MULLER" <MULLERPHARM@...> Time: Sat Mar 6, 2004 4:10 pm PST Link
Greetings fellow builders,
After aloding my wing ribs, I am about to prime them. The question I have
is, should I rivet them onto the wing spar, and then prime the spar and ribs
together, or prime them beforehand?. The reason I am thinking thus is that
by priming after fitting the ribs, I can fit the skins, drill out and dimple
the holes in the rib flanges and prime over the screw dimples in the wing
spar flanges. Is there a problem with priming directly over the alodized
spar?
Thanks,
Mick Muller
------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
Printer at MyInks.com. Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/1yWplB/TM
---------------------------------------------------------------------~-
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/RV-9A/
<*> To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/