Author: "MICK MULLER" <MULLERPHARM@...> Time: Wed Mar 24, 2004 4:31 pm PST Link
Greetings Listens, I am about to start on the W919. The instructions say to
get the specs from drawing 9. The drawing says what to make it from , but
does not specify a length. Do I assume that it finishes level with the
leading edge skin? It only protrudes about 3/4 of an inch either top and
bottom, so I could tuck it underneath the 904/905 skins if it is not
supposed to be trimmed.
Thanks,
Mick Muller
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/RV-9A/
<*> To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Author: "Robert Scott" <rscott@...> Time: Thu Mar 25, 2004 8:15 am PST Link
Hey Mick,
I trimmed mine right above the spar. I felt that if I extended it past the spar and under the L.E. skin it would cause the skin to stick out.
My 2 cents.
----- Original Message -----
From: MICK MULLER
To: RV-9A@yahoogroups.com
Sent: Wednesday, March 24, 2004 3:47 PM
Subject: [RV-9A] W919 joiner plate
Greetings Listens, I am about to start on the W919. The instructions say to
get the specs from drawing 9. The drawing says what to make it from , but
does not specify a length. Do I assume that it finishes level with the
leading edge skin? It only protrudes about 3/4 of an inch either top and
bottom, so I could tuck it underneath the 904/905 skins if it is not
supposed to be trimmed.
Thanks,
Mick Muller
------------------------------------------------------------------------------
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/RV-9A/
b.. To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/RV-9A/
<*> To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Author: Richard Tasker <retasker@...> Time: Thu Mar 25, 2004 8:59 am PST Link
Actually, this is Van's $0.02 as well. They told me exactly that when I
asked if I should cut it off as you say.
Dick Tasker, 90573
Robert Scott wrote:
> Hey Mick,
>
> I trimmed mine right above the spar. I felt that if I extended it past
> the spar and under the L.E. skin it would cause the skin to stick out.
> My 2 cents.
> ----- Original Message -----
> From: MICK MULLER
> To: RV-9A@yahoogroups.com
> Sent: Wednesday, March 24, 2004 3:47 PM
> Subject: [RV-9A] W919 joiner plate
> Greetings Listens, I am about to start on the W919. The
> instructions say to
> get the specs from drawing 9. The drawing says what to make it from
> , but
> does not specify a length. Do I assume that it finishes level with the
> leading edge skin? It only protrudes about 3/4 of an inch either top and
> bottom, so I could tuck it underneath the 904/905 skins if it is not
> supposed to be trimmed.
> Thanks,
> Mick Muller
> ------------------------------------------------------------------------------
> Yahoo! Groups Links
>
> a.. To visit your group on the web, go to:
> http://groups.yahoo.com/group/RV-9A/
>
> b.. To unsubscribe from this group, send an email to:
> RV-9A-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service.
> [Non-text portions of this message have been removed]
> ------------------------------------------------------------------------
> *Yahoo! Groups Links*
>
> * To visit your group on the web, go to:
> http://groups.yahoo.com/group/RV-9A/
>
> * To unsubscribe from this group, send an email to:
> RV-9A-unsubscribe@yahoogroups.com
> <mailto:RV-9A-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service <http://docs.yahoo.com/info/terms/>.
------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
Printer at MyInks.com. Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/1yWplB/TM
---------------------------------------------------------------------~-
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/RV-9A/
<*> To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/