Author: "Vodden Rocky" <voddenjr@...> Time: Fri Apr 1, 2005 3:42 am PST Link
I am trying to wire my Ray Allen elevator trim and having lots of trouble.
I have the panel mounted rocker switch (RS2) and LED indicator (RP3) and T3-12A servo, and also the new G-305 Ray Allen stick grips. I can operate the system using the rocker switch and LED indicator very well. I also can operate the system using the stick grips and LED indicator also very well. I can't wire the two systems together so I can operate ether the rocker switch or stick grip. Any suggestions or direction to solve this problem would be most helpful. I would like to contact Ray Allen for help with this but seems they do not put an email address on there web site. Any help would be grateful.
Regards Rocky (RV-9A 90699 Panel)
[Non-text portions of this message have been removed]
Author: "jcsmithers2002" <jcsmithers@...> Time: Fri Apr 1, 2005 5:33 am PST Link
--- In RV-9A@yahoogroups.com, "Vodden Rocky" <voddenjr@m...> wrote:
> I am trying to wire my Ray Allen elevator trim and having lots of
trouble.
Rocky,
To use stick switches with the Ray Allen servo system requires a REL-1
SERVO RELAY DECK from Ray Allen. I think other companies may offer
something similar. As shipped, the basic Ray Allen servo, switch and
LED indicator will only work properly with the single, panel rocker
switch which by the way isn't a simple DPDT switch.
J.C.
------------------------ Yahoo! Groups Sponsor --------------------~-->
Give the gift of life to a sick child.
Support St. Jude Children's Research Hospital's 'Thanks & Giving.'
http://us.click.yahoo.com/5iY7fA/6WnJAA/Y3ZIAA/1yWplB/TM
--------------------------------------------------------------------~-
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/RV-9A/
<*> To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Author: revenson@... Time: Fri Apr 1, 2005 5:33 am PST Link
Call them--they are very helpful. I think you need their relay.
-------------- Original message --------------
I am trying to wire my Ray Allen elevator trim and having lots of trouble.
I have the panel mounted rocker switch (RS2) and LED indicator (RP3) and T3-12A servo, and also the new G-305 Ray Allen stick grips. I can operate the system using the rocker switch and LED indicator very well. I also can operate the system using the stick grips and LED indicator also very well. I can't wire the two systems together so I can operate ether the rocker switch or stick grip. Any suggestions or direction to solve this problem would be most helpful. I would like to contact Ray Allen for help with this but seems they do not put an email address on there web site. Any help would be grateful.
Regards Rocky (RV-9A 90699 Panel)
[Non-text portions of this message have been removed]
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/RV-9A/
To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
------------------------ Yahoo! Groups Sponsor --------------------~-->
Help save the life of a child. Support St. Jude Children's Research Hospital's
'Thanks & Giving.'
http://us.click.yahoo.com/6iY7fA/5WnJAA/Y3ZIAA/1yWplB/TM
--------------------------------------------------------------------~-
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/RV-9A/
<*> To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Author: "ksouthar" <n162u@...> Time: Sat Apr 16, 2005 10:27 pm PDT Link
If I recall correctly, you will need to install a relay deck if you
are going to use both a rocker switch and a stick grip switch.
Keith
--- In RV-9A@yahoogroups.com, "Vodden Rocky" <voddenjr@m...> wrote:
> I am trying to wire my Ray Allen elevator trim and having lots of
trouble.
>
> I have the panel mounted rocker switch (RS2) and LED indicator (RP3)
and T3-12A servo, and also the new G-305 Ray Allen stick grips. I can
operate the system using the rocker switch and LED indicator very
well. I also can operate the system using the stick grips and LED
indicator also very well. I can't wire the two systems together so I
can operate ether the rocker switch or stick grip. Any suggestions or
direction to solve this problem would be most helpful. I would like to
contact Ray Allen for help with this but seems they do not put an
email address on there web site. Any help would be grateful.
>
> Regards Rocky (RV-9A 90699 Panel)
> [Non-text portions of this message have been removed]
------------------------ Yahoo! Groups Sponsor --------------------~-->
Give the gift of life to a sick child.
Support St. Jude Children's Research Hospital's 'Thanks & Giving.'
http://us.click.yahoo.com/5iY7fA/6WnJAA/Y3ZIAA/1yWplB/TM
--------------------------------------------------------------------~-
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/RV-9A/
<*> To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/