Author: "Smitty" <smitty@...> Time: Sat Aug 20, 2005 3:39 pm PDT Link
I am getting ready to fabricate the 2 HS-909 shims and can't see to locate
the AS3-040 material that is gets cut out of. Am I suppose to use the
material from the sheet metal bundle or am I missing a part? If I am missing
a part, does anyone know which piece from the sheet bundle I'm supposed to
use?
Thanks for your help!
Smitty's RV-9A
http://SmittysRV.com
------------------------ Yahoo! Groups Sponsor --------------------~-->
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/1yWplB/TM
--------------------------------------------------------------------~-
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/RV-9A/
<*> To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Author: "Bob Perkinson" <bobperk@...> Time: Sun Aug 21, 2005 4:36 am PDT Link
I can't remember it there was a piece with a label on it or not. If there
isn't a piece labeled just make a piece out of .040 in the scrap bundle that
Vans packed with the kit.
Bob Perkinson
Hendersonville, TN.
RV9A N658RP Reserved
If nothing changes
Nothing changes
-----Original Message-----
From: RV-9A@yahoogroups.com [mailto:RV-9A@yahoogroups.com]On Behalf Of
Smitty
Sent: Saturday, August 20, 2005 3:05 PM
To: RV-9A@yahoogroups.com
Subject: [RV-9A] HS-909 shims
I am getting ready to fabricate the 2 HS-909 shims and can't see to locate
the AS3-040 material that is gets cut out of. Am I suppose to use the
material from the sheet metal bundle or am I missing a part? If I am missing
a part, does anyone know which piece from the sheet bundle I'm supposed to
use?
Thanks for your help!
Smitty's RV-9A
http://SmittysRV.com
Yahoo! Groups Links
------------------------ Yahoo! Groups Sponsor --------------------~-->
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/1yWplB/TM
--------------------------------------------------------------------~-
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/RV-9A/
<*> To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Author: "top80ppg" <top80ppg@...> Time: Sun Aug 21, 2005 4:36 am PDT Link
I just went through this! Its in one of the little brown bags, can'r
remember the exact number and I'm not at the "hanger". Just look on
the list of what comes in the little brown bags and you'll find what
you're looking for!
Good Luck!
Scott -9 Emp
--- In RV-9A@yahoogroups.com, "Smitty" <smitty@s...> wrote:
> I am getting ready to fabricate the 2 HS-909 shims and can't see to
locate
> the AS3-040 material that is gets cut out of. Am I suppose to use
the
> material from the sheet metal bundle or am I missing a part? If I am
missing
> a part, does anyone know which piece from the sheet bundle I'm
supposed to
> use?
>
> Thanks for your help!
>
> Smitty's RV-9A
> http://SmittysRV.com
------------------------ Yahoo! Groups Sponsor --------------------~-->
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/1yWplB/TM
--------------------------------------------------------------------~-
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/RV-9A/
<*> To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Author: Lorin Dueck <lcdueck@...> Time: Sun Aug 21, 2005 4:39 am PDT Link
Smitty -
I had the same question. After spending ~10 minutes looking for the shim material, I checked the Bill of Material (packing list) and found them in one of the brown bags (Small Emp Parts #1913).
Lorin
Finishing emp... wings takin' up space in the garage
Smitty <smitty@smittysrv.com> wrote:
I am getting ready to fabricate the 2 HS-909 shims and can't see to locate
the AS3-040 material that is gets cut out of. Am I suppose to use the
material from the sheet metal bundle or am I missing a part? If I am missing
a part, does anyone know which piece from the sheet bundle I'm supposed to
use?
Thanks for your help!
Smitty's RV-9A
http://SmittysRV.com
---------------------------------
YAHOO! GROUPS LINKS
Visit your group "RV-9A" on the web.
To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
---------------------------------
---------------------------------
Start your day with Yahoo! - make it your home page
[Non-text portions of this message have been removed]
------------------------ Yahoo! Groups Sponsor --------------------~-->
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/1yWplB/TM
--------------------------------------------------------------------~-
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/RV-9A/
<*> To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Author: "Smitty" <smitty@...> Time: Sun Aug 21, 2005 7:46 am PDT Link
Thanks Lorin,
After reading your email, I went back to my wall storage unit and look in
the bins where I stored the brown bag stuff. I found the little shim buggers
in the #1903 bag labeled "Small Emp Parts" (they must have changed the bag
number). I had already given up on finding these shims and made some out of
the extra sheet bundle. It's a good thing I found them. The homemade shims I
cutout where too thick.
Thanks everybody!
Smitty's RV-9A
http://SmittysRV.com
----- Original Message -----
From: "Lorin Dueck" <lcdueck@yahoo.com>
To: <RV-9A@yahoogroups.com>
Sent: Saturday, August 20, 2005 7:05 PM
Subject: Re: [RV-9A] HS-909 shims
> Smitty -
> I had the same question. After spending ~10 minutes looking for the shim
> material, I checked the Bill of Material (packing list) and found them in
> one of the brown bags (Small Emp Parts #1913).
> Lorin
> Finishing emp... wings takin' up space in the garage
>
> Smitty <smitty@smittysrv.com> wrote:
> I am getting ready to fabricate the 2 HS-909 shims and can't see to locate
> the AS3-040 material that is gets cut out of. Am I suppose to use the
> material from the sheet metal bundle or am I missing a part? If I am
> missing
> a part, does anyone know which piece from the sheet bundle I'm supposed to
> use?
>
> Thanks for your help!
>
> Smitty's RV-9A
> http://SmittysRV.com
> ---------------------------------
> YAHOO! GROUPS LINKS
> Visit your group "RV-9A" on the web.
>
> To unsubscribe from this group, send an email to:
> RV-9A-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
> ---------------------------------
> ---------------------------------
> Start your day with Yahoo! - make it your home page
>
> [Non-text portions of this message have been removed]
> Yahoo! Groups Links
------------------------ Yahoo! Groups Sponsor --------------------~-->
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/1yWplB/TM
--------------------------------------------------------------------~-
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/RV-9A/
<*> To unsubscribe from this group, send an email to:
RV-9A-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/